INNOVATIONS IN ROBOTIC IMPLANT AND DENTAL TECHNOLOGY

Reading time is 5 mins

.
.
INNOVATIONS IN ROBOTIC IMPLANT AND DENTAL TECHNOLOGY

Technological advances are making the lives of both dentists and dental patients easier. In particular, the robotic implant prevents bleeding and discomfort caused by incorrect implant application.

Technologies in the field of dentistry are constantly evolving and changing according to dental patient needs. With the developing technology, it is possible to list the application areas that have started to be used in dentistry as follows:

Oral cancer diagnostic device:

It is a special kind of light that dentists use to detect any abnormalities in the mouth of their dental patients. It is effectively used to detect cancer or disease at an early stage.

Digital X-rays:

These rays are faster than conventional X-rays and contain less radiation. When a digital X-ray is taken from a patient, the image reaches the computer screen within seconds. The Turkish dentist can enlarge the X-ray image in order to make a better assessment and inform his dental patients about their oral health in Turkey.

.
TEETH ARE CLEANED EASILY

Radio orthodontics:

Thanks to this device, the teeth of dental patients with crossed teeth can be easily corrected with transparent dental plaques that are almost invisible. Invisalign plaques are easy to remove for cleaning, and they do not impose any restrictions on eating. Thanks to these plaques, it is possible to fix teeth in less time with less hassle.

Laser dentistry:

Lasers increase efficiency in dentistry. It improves patient comfort in many dental procedures such as tooth sensitivity removal, gum disease treatment, teeth whitening. Laser dentistry is applied painlessly, quickly and effectively.

Dental implants:

Dental implants are screws that act as the root part of missing teeth. Implants are placed in place of the missing teeth of the dental patients and give the patients a natural tooth feeling and appearance.

Caries diagnostic device:

It is a new device used to detect hidden caries that dentists cannot detect with an x-ray. With this device, bruises are detected without moving forward and signaling.

In-mouth camera:

An in-mouth camera is a tool used by dentists to get sensitive photos in areas where it is difficult for their patients to see in their mouth. The camera also shows physicians the images to their patients, allowing them to evaluate the treatments that need to be done together and inform their dental patients.

Bleaching:

Whitening treatment allows patients to quickly and easily whiten their teeth.

Nitrogen protoxide iv Sedation:

Nitrous oxide, also known as laughing gas, allows patients to calm down to a point where they are comfortable. At the same time, dental patients interact with dentists. IV sedation, on the other hand, allows patients to be asleep during dental treatments and be unaware of the procedures performed.

.
PREVENTING PORCELAIN FRACTURES

Computerized closing analysis:

Thanks to this technology, heights that you are not aware of are detected when you close your teeth and factors that may cause joint problems are eliminated. At the same time, porcelain fractures that may occur in the future will be prevented.

Color pick-up device:

It is a system used to ensure that porcelain teeth or fillings are no different from neighboring teeth. It also gives information about which mixtures the color to be applied will be obtained and to what degree of transparency it will be applied.

Computer-aided tomographic imaging:

This device provides the possibility of three-dimensional viewing. It also helps to clearly identify nerves, cavities, floors and ceilings located in the jaw.

Channel tip detectors:

It helps to fill the tooth canal that you have taken out the nerve in an ideal way. In this way, flooding or incomplete filling is prevented.

Three-dimensional measurement systems:

Thanks to this technology, the measurements are taken with the help of a special camera and sent to the laboratory that will make the prostheses as a special mail on the Internet. It is much faster than classical measurement methods.

Three-dimensional printers:

It is used in special jaw surgeries to print out the image taken from three-dimensional tomography. Thanks to this, the physician has the opportunity to practice before the operation.

Operating microscopes:

It is used to enlarge and sharpen the image in special surgical surgeries, canal treatments and aesthetic dentistry applications that we describe as sensitive studies. Thus, the damage to intact tissues is minimized and the integrity with neighboring tissues is not disturbed.

.
ADVANTAGES OF NAVIGATIONAL TECHNOLOGY

Thanks to this technology, problems that will arise during implant applications are determined in advance and there are no surprises during surgery.

It allows the implant to be placed at the correct angle and position. Modern technology support is limited for implant application despite 3D imaging technology in the lower jaw area. This causes drilling without details that are not precise and are not in the appropriate place. This condition also leads to slow and inadequate recovery.

After the operation, because there are no surgical cuts, bleeding and stitches, very fast recovery is achieved.

Surgical planning with very detailed digital tomography information taken from the dental patient provides a great advantage over panoramic X-ray.

.
A SECURE APPLICATION

Robotic implant application: Navigation implant is a reliable method. Thanks to this site, the doctor does not need to cut the gum and see the bone. In implant treatments, the doctor reaches the bone by cutting the gum and follows a treatment path by looking at the bone. With this technology, all detailed information from the location of the nerves to the bone thickness can be obtained instantly, so that appropriate treatment can be performed reliably. The system, which offers the possibility of implant treatment safely and quickly, prevents bleeding and discomfort caused by incorrect implant application, as well as Turkish doctor errors.

.
THE THREE-STEP METHOD

The surgical guidance system consists of three stages. At the initial stage, a three-dimensional tomography of the jaw is taken. Detailed jaw-bone information obtained thanks to the tomography taken is displayed in three dimensions. This information is transferred to the surgical guidance system. Then sensors with eyes inside are placed in the patient’s mouth. Thanks to these verbal receptors, all the mimetric movements made by the doctor are reflected on the monitor. The doctor can easily see the jaw information, the depth of the nerves and the bone quality in this area by seeing the area he will treat on the monitor. The sensors alert the doctor within seconds to ensure that the implant slot is opened in the most correct place.

Proper preparation of the implant socket and reduction of surgery complications accelerate the boiling of the implant to the bone.
.

The implant with navigation allows tissues to heal faster. Since the gum does not need to be opened to see the bone tissue, less pain and edema occur, tissue healing is faster. The risk of infection with this method of treatment is reduced to a minimum.

.
.
.
.

Follow me
President of Organ Transplant Center at MedicalPark Hospital Antalya

Turkey's world-renowned organ transplant specialist. Dr. Demirbaş has 104 international publications and 102 national publications.

Physician's Resume:

Born on August 7, 1963 in Çorum, Prof. Dr. Alper Demirbaş has been continuing his work as the President of MedicalPark Antalya Hospital Organ Transplantation Center since 2008.

Prof. who performed the first tissue incompatible kidney transplant in Turkey, the first blood type incompatible kidney transplant, the first kidney-pancreas transplant program and the first cadaveric donor and live donor liver transplant in Antalya. Dr. As of August 2016, Alper Demirbaş has performed 4900 kidney transplants, 500 liver transplants and 95 pancreas transplants.

In addition to being the chairman of 6 national congresses, he has also been an invited speaker at 12 international and 65 national scientific congresses. Dr. Alper Demirbaş was married and the father of 1 girl and 1 boy.

Awards:

Eczacibasi Medical Award of 2002, Akdeniz University Service Award of 2005, Izder Medical Man of the Year Award of 2006, BÖHAK Medical Man of the Year Award of 2007, Sabah Mediterranean Newspaper Scientist of the Year Award of 2007, ANTIKAD Scientist of the Year Award of 2009, Social Ethics Association Award of 2010, Işık University Medical Man of the Year Award of 2015, VTV Antalya's Brand Value Award of 2015.

Certificates:

Doctor of Medicine Degree Hacettepe University Faculty of Medicine Ankara, General Surgeon Ministry of Health Turkey EKFMG (0-477-343-8), University of Miami School of Medicine Member of Multiple Organ Transplant, ASTS Multiorgan Transplant Scholarship. Lecturer at Kyoto University. Lecturer at University of Essen, Research assistant at the University of Cambridge .

Professional Members:

American Society of Transplant Surgeons, American Transplantation Society Nominated, Middle East and Southern Africa Council Transplantation Society 2007, International Liver Transplantation Association, Turkish Transplantation Association, Turkish Society of Surgery, Turkish Hepatobiliary Surgery Association.

Disclaimer:

Our website contents consist of articles approved by our Web and Medical Editorial Board with the contributions of our physicians. Our contents are prepared only for informational purposes for public benefit. Be sure to consult your doctor for diagnosis and treatment.
Medically Reviewed by Professor Doctor Alper Demirbaş
Follow me
Latest posts by Medically Reviewed by Professor Doctor Alper Demirbaş (see all)