WHY DO DENTAL IMPLANT PRICES DIFFER IN TURKEY?

Reading time is 5 mins

.
.
WHY DO DENTIST IMPLANT PRICES DIFFER IN TURKEY?

The biggest reason why implant treatment is performed at different prices in Turkey, in different hospitals and dentist centers is the Turkish doctor’s experience, the difference in technology and materials used.

Turkey Medicals – Be sure to find out the brand of the implant teeth in Turkey used by your doctor.

Everything from the technology that the dentist uses in his clinic, as well as his experience, to the material, affects your health. Cheap products made in copies cause irreversible damage to your teeth and even your health. There are two factors in the difference in implant prices: The first is the knowledge, skills, experience and technological equipment of the physician who applies the implant. If there are deficiencies in any of them, it becomes difficult for you to achieve success even if you use the best implant brand. Your equipment is excellent, your technology and skills are also very good, but if there are problems with the brand of implant you are using; it will again be impossible for you to achieve success. People who are going to have an implant should definitely find out the brand of the implant that will be applied to them from their doctor and research this implant.

Turkey Medicals – The brand that will be used for the person must necessarily have a distributor in our country. To understand this, you can go to the official website of the brand and look at the country distributors section, or you can check by asking the Turkey distributor from the contact section.

The biggest factor we draw attention to this issue is that even if there is no problem with your implant after a certain time after you have had your implant, you will still need a part in prosthetic changes that will occur or in cases where the coating of the implant you have applied needs to change. Because of the gum problem, close to three more parts will be needed to replace the part of your implant in the form of a cut tooth and make a new prosthesis. If you cannot provide these parts, this implant will be of no use other than a screw buried under the gum in your patient’s mouth. So, if you can’t provide these parts, you will not be able to get the implant. There are more than a thousand implant companies in the world, but we can only see 10-15 brands regularly at the congresses every year.

.
ASK THE DOCTOR ABOUT THE IMPLANT KITS

Patients who will be implanted should investigate whether the clinic or practice has an absolute imaging system (panoramic or tomographic). Because sometimes it may be necessary to take two, three or even more X-ray images during an implant operation. Because the jawbone is filled with holes through which nerve vascular bundles pass and where there are anatomical gaps. The necessity of equipment should also be asked in order to prevent bleeding that may occur during the implant operation. The necessity of maintaining the sterilization system at the highest level should be investigated. The doctor should also be asked if the implant kits that will be used are serviced by the company or belong to the doctor himself. These are the most natural rights of patients. The parts used when making an implant for a patient are, respectively: Implant screw, gum shaper, laboratory analogue, measuring post and the upper structure of the implant, which we call abutment: Not using one of them may affect the success of the implant. In addition, each of these parts must be disposable and opened from special sterile bags for you.

.
IT LEADS TO BONE RESORPTION

Implants manufactured as copies can initiate a process that leads to bone resorption, so care should be taken when choosing a product. As implants produced more cheaply with the copying of global patented products became widespread, patient complaints also began to increase. Considering the price-oriented, implants applied without the use of healthy materials lead to various problems. It should be taken into account that the use of cheap products that do not meet international standards can cause serious problems that eventually lead to bone resorption, infection and implant loss. It is impossible for implants not to fuse with human bone when appropriate conditions are created. Implant failure should not be interpreted as a rejection of the jawbone implant when appropriate conditions are not created. Implants made of titanium fuse with bone tissue in any case, but the losses experienced for various reasons are in low percentages, such as 2-3 percent in good implant systems and experienced hands. The reasons for the implant that does not hold as a result of implant application may be one of the following:

Lack of sterilization,

Insufficient amount of bone,

Appropriate and non-standard bone materials,

A brand of implant that is not suitable and of sufficient quality,

The patient’s inability to maintain adequate oral hygiene after the procedure,

Excessive cigarette consumption,

The fact that the appropriate prosthesis could not be made on a boiling implant.

.
THE TECHNOLOGY USED BY THE PHYSICIAN IS AS IMPORTANT AS HIS/HER EXPERIENCE

Patients who will have implants should not think only price-oriented. The implant requires quality products and experience. For success in implant application:

Patented products of international standards that have proven their success with long-term clinical results.

Well-trained, experienced, technologically equipped physicians

It is extremely important for your health to choose places where the sterilization rules are fully observed. The biggest factor in the success of your implant is that the oral environment can be cleaned of caries and treated with gum treatment before implant application. If you have several missing teeth, but you have gum problems and caries; getting your missing tooth done before having these treatments negatively affects the success of your treatment.

.
NAVIGATION GUIDES THE DOCTOR

The ‘surgical guidance system’, called the ‘navigation system’ in the medical field, informs the doctor of all dental, oral and maxillofacial information in dental treatment and guides the doctor by determining the most appropriate place where the implant will be made. The system warns the doctor if there is a shift from the place it detects during treatment, reducing the margin of error to zero. The general functioning of the system is based on the surgical planning with very detailed digital tomography information received from the patient and the implementation of this plan to the patient during the intervention. Three-dimensional planning and digital tomography have a great advantage over panoramic X-ray.
.

ADVANTAGES

The advantages of navigational implant technology include:

Thanks to this technology, problems that may be encountered during implant applications are determined in advance, analyzed and no surprises are experienced during surgery in Istanbul and Antalya Turkey.

Modern technology that allows you to place the implant at the right angle and position, support is limited for implant application, despite 3-D imaging technology in the lower jaw area. This causes drilling without details that are not in the exact and appropriate place, which can lead to slow and inadequate healing.

After the operation in Turkey, because there are no surgical cuts, bleeding and stitches, very fast recovery is achieved.

Surgical planning with very detailed digital tomography information taken from the dental patient provides a great advantage over panoramic X-ray.

.
.
.
.

Follow me
President of Organ Transplant Center at MedicalPark Hospital Antalya

Turkey's world-renowned organ transplant specialist. Dr. Demirbaş has 104 international publications and 102 national publications.

Physician's Resume:

Born on August 7, 1963 in Çorum, Prof. Dr. Alper Demirbaş has been continuing his work as the President of MedicalPark Antalya Hospital Organ Transplantation Center since 2008.

Prof. who performed the first tissue incompatible kidney transplant in Turkey, the first blood type incompatible kidney transplant, the first kidney-pancreas transplant program and the first cadaveric donor and live donor liver transplant in Antalya. Dr. As of August 2016, Alper Demirbaş has performed 4900 kidney transplants, 500 liver transplants and 95 pancreas transplants.

In addition to being the chairman of 6 national congresses, he has also been an invited speaker at 12 international and 65 national scientific congresses. Dr. Alper Demirbaş was married and the father of 1 girl and 1 boy.

Awards:

Eczacibasi Medical Award of 2002, Akdeniz University Service Award of 2005, Izder Medical Man of the Year Award of 2006, BÖHAK Medical Man of the Year Award of 2007, Sabah Mediterranean Newspaper Scientist of the Year Award of 2007, ANTIKAD Scientist of the Year Award of 2009, Social Ethics Association Award of 2010, Işık University Medical Man of the Year Award of 2015, VTV Antalya's Brand Value Award of 2015.

Certificates:

Doctor of Medicine Degree Hacettepe University Faculty of Medicine Ankara, General Surgeon Ministry of Health Turkey EKFMG (0-477-343-8), University of Miami School of Medicine Member of Multiple Organ Transplant, ASTS Multiorgan Transplant Scholarship. Lecturer at Kyoto University. Lecturer at University of Essen, Research assistant at the University of Cambridge .

Professional Members:

American Society of Transplant Surgeons, American Transplantation Society Nominated, Middle East and Southern Africa Council Transplantation Society 2007, International Liver Transplantation Association, Turkish Transplantation Association, Turkish Society of Surgery, Turkish Hepatobiliary Surgery Association.

Disclaimer:

Our website contents consist of articles approved by our Web and Medical Editorial Board with the contributions of our physicians. Our contents are prepared only for informational purposes for public benefit. Be sure to consult your doctor for diagnosis and treatment.
Medically Reviewed by Professor Doctor Alper Demirbaş
Follow me